How to connect a music center to a computer

Often, computer speakers or laptop speakers do not reproduce sound in the desired quality, so many use the stereo to enjoy high-quality sound. However, it requires the constant purchase of disks or connect a flash drive. To avoid this, you can connect it directly to your PC and listen to music without restrictions.

First of all, you need to make sure that your center has such a function. It is called AUX. Without it, playing the sound from the computer will not work.

REFERENCE! Connecting a music device to your computer also allows you to listen to the radio.

An equally important component is a special network cable - 2RCA-mini jack (people often call it tulip for its flower-like appearance). It can be either purchased at the store or made with your own hands if you have the appropriate skills. A regular cable is inexpensive, so if you do not have its components, you should not do it yourself. Sometimes such a tulip comes immediately complete with a music center.

When choosing a jack, it is recommended to pay attention to the following nuances:

  1. Diameter. Different models have ports of a certain diameter, so before going to the store, you need to specify the size. This can be done both in the documentation of the device and in the characteristics of the model on the Internet.
  2. Cord length In order not to be in that situation when with direct connection there is not enough cable length, it is best to calculate it in advance.
  3. Golden plating. It is believed that such plugs conduct sound better. However, this difference can only be felt on professional equipment, so if you have the most ordinary speakers, you should not waste money.

IMPORTANT! Do not connect the speakers of the computer directly to the center - this can lead to short circuit of the wires, as well as damage to both devices.

In case of insufficient length of the cable purchased, an additional adapter can be used. However, do not get carried away with such an extension of the wires: the more joints, the worse the quality.

Connect the stereo to a computer is not difficult. Anyone can do this by following a simple action algorithm:

  • first of all, you must turn off both the stereo system and the computer for security purposes;
  • find suitable ports;
  • Connect the cable to the computer - in most cases the green jack is suitable, after the other two jacks - to the second device;

IMPORTANT! It is recommended to place the connected equipment as close to each other as possible in order to avoid long wires. If this is not possible, then you should hide the cable behind the furniture or just under the baseboard. This will protect you from accidents, and the wire from damage.

  • turn on the device;
  • On the music center, select "AUX" - a mode that allows the transfer of sound from one device to another;
  • If you need to install the appropriate drivers on your computer (if they are not included in the package bundle of the music center, you can find the ones that are suitable on the Internet);
  • on the computer, go to the sound settings (Start, Settings, Control Panel) and select "Speakers" or "Subwoofer" as the playback (output) device;
  • do the test.

Connecting a computer and the center does not take much time, but it will allow you to listen to any music in high-quality sound without rewriting to discs and flash drives.

Watch the video: Music Center for PC Importing content from a computer (March 2024).

Leave Your Comment