How to parse jbl column

The portable jbl wireless speakers of the American brand are loved by users with the possibility of compatibility with smartphones and tablets. Convenient speakers can be taken with you wherever you go. With their compact size, jbl speakers deliver powerful, rich sound. They are well protected from dust, thanks to the shape and almost monolithic plastic case, covered with a moisture-proof fabric.

Is it possible to parse the jbl column yourself

It is possible, but mainly it is necessary to disassemble them for cleaning, like other types of columns, there is no need.

If a simple repair is required, for example, the battery has failed in the column, you can disassemble it yourself. With a spare battery, replacement is possible. This is especially true on vacation away from civilization and service workshops. If necessary, you can disassemble the column using simple tools that every motorist in the car has.

Reference! Dismantling the column takes no more than 10-20 minutes, depending on the model.

Important points before disassembling

Before disassembling, make sure that it is needed. In nature, it may seem that the sound has become quieter and one of the speakers has broken. You can increase the factory sound by switching from low frequencies to high ones. This is done by simultaneously pressing the "-" and "Bluetooth" buttons with holding them for 10 seconds. After this time, the sound will become louder, the buttons can be released. Returning to the previous sound is done in the same way.

Important! Experiments with sound profiles can damage the speaker. For work, it is better to use the factory settings.

Particularly important preparatory operations before disassembling the columns are not required. It is enough to clean it from dust or moisture, if any. It is recommended to disassemble it on a table or on the floor with a bedspread, so that small fasteners are not lost.

Before starting work, you should study the instructions, which must be attached to each column, or special literature. You can watch detailed video tutorials on disassembling different models of jbl speakers on the Internet. There are varieties of devices, for example, djibiel charge, flip. There are also Chinese versions of such speakers.

What is required

To disassemble you will need:

• a medical spatula or a wide flat screwdriver;
• a screwdriver with a set of nozzles for precision work with a different shape of the tip;
• tweezers.

Attention! A medical spatula is necessary to avoid damage to the protective cover during its separation from the housing.

The process requires careful and accurate handling of system components. Some models use side speaker gluing. In this case, you will additionally need an adhesive like "Moment" for bonding plastic parts.

Dismantling a jbl column: step-by-step instructions

A step-by-step instruction for disassembling a cylindrical jbl Extreme wireless speaker allows you to use it in relation to any model of speakers of this brand. jbl Extreme have a moisture-proof housing, the ability to connect to Apple or Android gadgets. Dismantling is carried out in several steps:

1. Pry off the latches with a spatula and separate the decorative protection from the base;
2. Unscrew 2 screws from the case with a cross-shaped screwdriver;
3. Remove the protection from the housing;
4. Unscrew 3 screws under the zipper in the lower part;
5. Pry off with a spatula and snap off the bottom cover from the base;
6. Unscrew the 8 screws holding the stand;
7. Carefully remove the stand without touching the charge indication system, which is connected to it via a loop;
8. Unscrew the 2 screws and remove the display system;
9. Unscrew 4 screws on the right side, remove the right speaker;
10. Unscrew 4 screws on the left side, remove the left speaker;
11. Disconnect the terminals from the speakers;
12. Remove the side passive diffusers with a spatula;
13. Disconnect the battery terminal, made in the form of clothespins;
14. Take out the battery;
15. Disconnect the amplifier board below it from the battery.

The popular jbl Charge column, which has a simpler design, is parsed differently:

1. Carefully peel off both rubber pads on top and bottom;
2. Pry off a decorative lattice around the entire perimeter with a spatula and remove it;
3. Unscrew 6 screws;
4. Pry off with a spatula to open the plastic case;
5. Disconnect the terminals and remove both speakers;
6. Disconnect the board from the battery;
7. Remove 3 screws, remove battery.

Attention! To make rubber pads easier to remove, they can be preheated with hot air using an electric hairdryer.

The columns are assembled in the reverse order. Disassembling jbl with bluetooth helps determine the original version from a fake. They are distinguished by the quality of the component parts of the column, starting from the material of the outer cover and logo, ending with the declared and actual power of the speakers and build quality.