The difference between an engineering board and a parquet board

Currently, you can find several varieties of flooring made from natural material. However, each of them has properties that are different from each other. In this article, we will analyze some of them, and also try to decide which species is better to choose in a particular situation.

The main features of the floorboard

The product itself, unlike ordinary parquet, consists of several layers. This helps to significantly increase the life of the structure, as well as provide soundproofing to the room. In addition, the purchased material is already ready, respectively, for installation, that is, it does not require further processing. Below is a list with brief specifications:

• The first layer provides stability and uniform distribution of stress between other parts of the surface.
• The next element is considered the main one. Thanks to it, a single coating is guaranteed, which does not need any grinding or fitting.
• A decorative row is made at the expense of certain wood, for example, it can be either oak bark, maple, or cherry or ash.
• The final component is a protective topcoat. It most often includes products such as special varnish, wax, oil-wax mixture and various types of oil.

Thus, using the described layers, we can talk about such features as water resistance, protection from the sun, scratches and other damages.

Main features of the engineering board

The presented version of the raw material is also made according to the multilayer principle. However, the layers are different, due to which her advantages are different. For example, this item does not respond to sharp jumps in temperature and humidity indicator, since the wood fibers in the structure are located in the opposite direction.

ATTENTION. In the future, the construction can be repaired, since the resource itself allows it to grind itself and cycle.

So, the provided layers:

• The main element is premium birch plywood. It includes more than 6 layers, the amount can reach up to 8.
• The decorative layer gives the coating a neat appearance.
• The protective layer does not differ from the previous version: it is also equipped with glue, oil and other processing agents.

In addition, it is equipped with stiffening ribs, which allows it to be even more stable. As for the laying itself, it’s better not to do it on plywood, but immediately on the screed. Due to this method, you can significantly reduce costs. However, it is important to remember that no screws are required to lay the object.

What is the difference between a parquet board and an engineering board

So, in conclusion, it is possible to draw conclusions that may help with the purchase of a product. The difference between parquet and engineering material is as follows:

1. The maximum size of the first of them is several indicators less than the second, namely the length: 2.2 meters and 2.4, respectively.
2. Further, what you can notice is the difference in design. When using a parquet product, the user can rely solely on the classic version, but with a variety of processing. The other has a “herringbone” or “square” surface.
3. An important difference is the styling method. Despite the fact that in the application of an engineering board, a glueless method may be needed, as in another subject, there is the possibility of using glue. Consequently, with parquet plywood, only the floating option is needed.
4. The service life is also different. The first of them is usually used for about 20 years. Speaking of the second, it is worth mentioning a much larger amount of time - up to 40 years.
5. Both have a water heating system. An infrared heating method should be added to the parquet element.
6. If you decide to restore the design, then a simple interaction can be expected only with the first product mentioned. Due to the addition of glue, the second job will be difficult.
7. Perhaps the last thing to mention is the difference in cost. For engineering, you will have to pay more than three thousand rubles.