How to connect the gsm module to the boiler

The basis of a comfortable stay in the house is the efficient operation of the heating system. A modern boiler with a high level of efficiency that runs on solid, liquid or gaseous fuels helps maintain heat inside the home. The additional equipment of the heating system with an innovative GSM module will provide simple and convenient control over the operation of a home boiler room using a cellular network, increasing its energy efficiency and economy.

Features and capabilities of the gsm module

The GSM module for heating devices is a whole system that allows you to remotely and automatically control the heating operation. The use of such a module will help increase heat transfer, as well as increase the service life, and eliminate the occurrence of emergency situations.

A standard set of the GSM heating control system includes a number of components:

1. Controller. The device has a different number of inputs, it is used to connect a number of additional devices and remotely control the system through a cellular network.
2. Temperature sensors. Depending on the controller model, the number of internal and external sensors can range from two to ten.
3. Cellular Antenna. The main objective of this element is to amplify the signal for the most reliable and uninterrupted communication of heating equipment with the owner’s mobile device.
4. Additional sensors. As a rule, these include sensors that respond to movement, fire, temperature increase above a critical point, all kinds of emergency sirens, fuel level sensors (for boilers in diesel fuel or gasoline).

The functionality of any modern GSM module is incredibly extensive. Such a simple and inexpensive device allows you to remotely turn on and turn off heating equipment, configure operating modes, and obtain information on the temperature of the coolant and indoor conditions. In addition, the controller will notify of a gas leak, fire, power surges.

How to connect the gsm module to the boiler

The procedure for connecting the network controller to the heating units is carried out in a certain sequence, consists of several stages:

1. Installation of sensors in the room and inside the boiler, connecting them to a single controller.
2. Preparing and installing a SIM card. You should disable the PIN code on the card, and also make a certain list of trusted numbers.
3. Checking the operation of the system. The GSM module software has a number of basic settings that ensure the start of operation of the entire system. The user will be available data on temperature, voltage and other characteristics of the boiler.

REFERENCE! To control the heating system using a cellular controller is quite simple. There is a certain number of SMS commands, sending which, you can perform various actions - turn the boiler on and off, set the heating temperature of the coolant.

Advantages and disadvantages of the module

Modern GSM modules are self-contained and functional devices that can increase the comfort of using boilers. The advantages of such devices include:

1. Remote control of all boiler functionality via SMS messages. The list of such commands is usually specified in the operating instructions from the equipment manufacturer.
2. Instantly obtain data on the operation of the heating system even at a significant distance (the main thing is that there is access to the cellular network).
3. Automatic notification of problems and malfunctions of the heater - power surges, extinction, gas leak, overheating.
4. Effective protection of the GSM module from unauthorized introduction of outsiders by means of a PIN code set by the owner himself.

Despite a number of advantages, the modules for boilers have some disadvantages:

1. The need for a stable connection to the cellular network. In this case, the coating should be both in the area where the heater is installed, and in the location of its owner.
2. The absence in some budget models of GSM modules of the option of turning the boiler on and off in the remote mode.
3. The high cost of additional equipment.

GSM modules as a whole can be called a good choice for any boiler - from solid fuel to gas. It is possible to complete with such equipment heating systems of any size, including those installed in a private house, in a country house, warehouse or in an industrial building. Together with such controllers, the heating systems will work more efficiently, reliably and without fail, informing the owner of all changes, whether it is heating or cooling of the coolant, or fuel cut-off.