Many users of computers and stereo systems noted the presence of the inscription Treble on the speakers. What does it mean, what is it for, and how to use it? We will talk about this in more detail later.
Treble on the speakers: what is it
Treble is a measure of high frequencies, and Bass is low. Interestingly, Treble is translated from English, but it also has a translation of a treble indicator. The early Treble was translated as the musical vocal direction of the soprano, but today it also means the sound of sound. The treble - discantus. Literally translated as singing and dismemberment or polyphony.
On many modern speakers, Treble stands for High Frequency. He is responsible for the loud and optimal transmission of the music coming into the speakers. As a rule, it requires careful study and scrolling of the corresponding buttons with this designation, since all indicators should be normal in a high-quality music system. It doesn’t matter, it’s about a professional music studio or an ordinary home theater.
Attention! To achieve this, you must learn to work with high and low frequencies. This will help the instructions for the columns and the advice of experienced sound engineers. Naturally, your own hearing will also help, because without it you cannot correctly set the frequency and organize a clean sound for listening to melodies, recording songs and other things.
Why treble on columns
As it turned out, the inscription treble on the speakers indicates high frequency or treble frequency. The treble is responsible for the volume and the amplified musical signal. She enters into some kind of harmonious relationship with a low frequency, that is, with Bass, and as a result, a pure melody is formed. Check the indicator will allow the amplitude frequency response, which is displayed on the graphs of computers in professional studios or music stereo systems. Any deviations are expressed in decibels. The smoother the graph, the better the sound of the music. Sharp fluctuations in frequencies indicate distortion of sound.
The inscription treble, as a rule, is on tweeters or tweeters. They work only with high frequencies and make the sound more powerful. Thus, the treble is responsible for the bass or sound power, and the cleaner it is, the better. Also treble can often be found on the most ordinary speakers in a music studio.
How to use treble on columns
Any music system has four adjustments: volume, low, medium and high performance. By rotating them, it is possible to adjust the sound and make it harmonious for perception. It is impossible to set the maximum due to possible overload and distortion of sound, as well as to put high indicators in the foreground - as a result, only dynamic vibrations will be heard.
Each sound engineer knows that all indicators must be in balance. If you remove the middle frequency, then to adjust the sound you need to add treble, and if you remove, you need to add Bass. However, adjusting the sound does not come down to adjusting the speakers. She also needs to adjust the source, player, or computer. In this case, you can use the equalizer that controls the stream of output sound.
The equalizer will tell you how to use treble on the speakers, which direction to turn the corresponding buttons to get a clear signal without overload and clear bass. It is on almost every computer and player, the main thing is to learn how to use it correctly as well. If you have concert equipment, then you can configure the computer in it and the speakers can be remotely controlled with special frequency sliders. They serve instead of the equalizer or complement it.
If only the controls on the speakers and high with low performance are set incorrectly, they distort the signal. In order for them to work correctly, you need to study the instructions attached to the columns or use the following advice from users: the higher the signal quality, the more you need to turn the frequency to the right, and the lower it is, the more you need to turn left. Zero value - left to the end. Naturally, you need to check the sound at your hearing, however, so that it does not fail, it is enough to use the general rules for adjusting the treble of all musicians and sound engineers.
In general, the designation of this indicator on music speakers indicates high frequency. This is an important indicator of any stereo system, which allows you to correctly adjust the signal for watching a movie, recording a music album and any other actions with music. You can adjust the indicator according to special instructions from the speaker manufacturer or on the advice of experienced sound engineers. In any case, the adjustment is carried out by ear.
Leave Your Comment