Why the phone does not see the column on bluetooth: the phone does not see the jbl column, what to do

Bluetooth speakers are a very popular tool among different ages. Especially among young people. And it is not surprising, because they are comfortable and allow you to simultaneously pair the phone and listen to music, using it as usual. But when working through bluetooth there are various problems. The most frequent is that the phone does not recognize the unit. Let us see why this is happening, and how to eliminate these problems.

Features of the speakers via Bluetooth

The column has a built-in bluetooth module through which data transfer occurs. The most popular is the jbl model, however, they all work on the same principle. It passes as follows.

The power on the column is turned on.
Then you need to turn on the function "bluetooth".
Next, turn on a similar feature on the phone.
In the phone settings you need to find the name of the unit, and connect to it.
Next comes the pairing, and you can freely enjoy music up to 10 meters from its source.

But the work does not always go so smoothly, and when attempting to pair, the phone may simply not display the proximity of the bluetooth devices. This indicates a malfunction of technology. They can be of different kinds.

The reasons why the phone may not see the column

Possible causes are divided into two types:

software;
technical.

First, you should check the program settings and the most simple causes of possible problems. And only then find out what problems can be with the "iron".

Problems with settings

First, let's deal with the simplest - settings. But before diagnosing technical problems, find out whether all the conditions for the operation of the devices are met. So check:

whether the column is charged;
is it enabled;
whether bluetooth function is enabled on both devices;
Does the distance exceed the allowed limit?
Is there any other electronics between devices that may cause interference?
Is the speaker connected with other devices?

These are the most common software problems that are associated with the correct settings.

On a note! All steps when working with a column are accompanied by sound signals. If not, then it does not work.

What may be technical faults

If all the above conditions are met, and the phone still does not see the column, then there is the likelihood of technical problems. Manifestations of technical problems are the following:

the column does not work at all;
it does not charge;
Bluetooth function does not work on both devices.

If the device is not charging, respectively, it will be discharged at the time of pairing. A discharged device cannot transmit a signal, so the phone will not see it. Also, the device search and signal transfer function may be completely absent.

In the first two cases, the cable may be damaged. In the second, the Bluetooth module fails. The reasons may lie in another, but in any case they are connected with the breakdown of the "iron".

How to eliminate the reasons why the phone does not see the column

Your actions depend on the type of reason. If you are faced with simple tasks, you can complete them yourself. If you are sure that it is a technical malfunction, contact the service.

Important! If you do not understand the work of electronics, do not spin the column yourself, it is better to contact the master.

Self troubleshooting

To get started, try to fix the problem yourself. To do this, follow these steps with the column:

Check if it is charged. If it is discharged, the power button will flash, if charged, it is just lit.
Check if the bluetooth function works. After its inclusion should sound the corresponding sound. If it does not exist, but the device works, it means that the bluetooth is faulty.
Look in the settings of all close phones, if there is any conjugation with the unit. Probably, someone else’s phone mated earlier, and now did it automatically.

On a note! A column cannot be simultaneously paired with multiple devices.

When do you need professional help?

If you notice signs of technical problems that were described above, and the phone still does not see the column, then you should take it to the service.